Quantity: | |
---|---|
Advantage
1. Ideal for paint spraying and the application of sealants and protective coatings in automotive manufacturing.
2. Erosion-resistance tungsten carbide orifice insert provides.
3. Excellent Corrosion Resistance.
4. High-impact flat spray pattern with tapered edges, provides even coverage when sprays overlap.
5. Tip orifice inserts is recessed in a solid stainless steel tip body to protect against damage.
Grade Information
Grade | Density(g/cm3) | T.R.S MPa | Hardness(HRA) | Performance & Application recommended |
YL10.2 | 14.50 | 3400 | 92.5 | Qualified for low speed rough machining,milling,titanium alloy and refractory alloy,especially for cut-off tool and sick prick. |
YG3 | 15.20-15.40 | 1400 | 91.5 | Medium grain,for finishing machining of cast iron and non-ferrous Metals |
YG6X | 14.90 | 1560 | 91.0 | Qualified for machining of chilled cast iron,alloy cast iron,refractory steel analloy steel.Also qualified for the machining of common cast iron. |
YS2T | 14.45 | 2800 | 92.5 | Qualified for low speed rough machining,milling,titanium alloy and refractory alloy,especially for cut-off tool and sick prick. |
YG3X | 15.20-15.40 | 1300 | 92 | Fine Grain,for finishing machining of cast iron and non-ferrous metals |
Advantage
1. Ideal for paint spraying and the application of sealants and protective coatings in automotive manufacturing.
2. Erosion-resistance tungsten carbide orifice insert provides.
3. Excellent Corrosion Resistance.
4. High-impact flat spray pattern with tapered edges, provides even coverage when sprays overlap.
5. Tip orifice inserts is recessed in a solid stainless steel tip body to protect against damage.
Grade Information
Grade | Density(g/cm3) | T.R.S MPa | Hardness(HRA) | Performance & Application recommended |
YL10.2 | 14.50 | 3400 | 92.5 | Qualified for low speed rough machining,milling,titanium alloy and refractory alloy,especially for cut-off tool and sick prick. |
YG3 | 15.20-15.40 | 1400 | 91.5 | Medium grain,for finishing machining of cast iron and non-ferrous Metals |
YG6X | 14.90 | 1560 | 91.0 | Qualified for machining of chilled cast iron,alloy cast iron,refractory steel analloy steel.Also qualified for the machining of common cast iron. |
YS2T | 14.45 | 2800 | 92.5 | Qualified for low speed rough machining,milling,titanium alloy and refractory alloy,especially for cut-off tool and sick prick. |
YG3X | 15.20-15.40 | 1300 | 92 | Fine Grain,for finishing machining of cast iron and non-ferrous metals |