Products

News

You are here: Home » Products » Carbide Mining Tools » Carbide Drill Bit Teeth
Share to:

Carbide Drill Bit Teeth

Tungsten carbide is widely used in industry because of its extraordinary properties. Because of its wear resistance and hardness (9.8 Moe's scale), tungsten carbide is ideally suited for wear parts, other machine parts and dies which are subject to severe service conditions, such as high temperatures, corrosion and abrasion.. In recent years, tungsten carbide has emerged as a superior alternative to steel in many industrial applications.

Quantity:
  • Customized
  • FOTMA

HIP Tungsten Carbide Mining Drilling Tips for Rock / Oil / Coal Drilling Bits

 

Tungsten Carbide Drilling Tips for mining are mainly known as tungsten carbide buttons, For rock drilling and percussion tool, drilling in soft ,medium and hard formations.
 
By using carbide drilling tips, with its superior wear resistance and impact toughness, The speed of drilling and digging will be more faster than other same kinds product.
 
Our drilling tips are widely used in open-pit mine for mining, quarry, water and electricity engineering, water well drilling, the support of excavation side column etc.

 

Introduction of Carbide Mining Drilling Tips:

 

1. Grade: YG8, YG11, YG11C etc.

2. CIP pressed,extruded ,HIP sintered
3. Application for mining and oil-field rock tools.

4. Tungsten carbide tipped center
5. Hard Metal / Performance: It is fitting for serving as drill heads of heavy rock-digging machinery, plumbun heads are used in deep hole drilling and rock drilling terrace vehicles. 

 

Advantages of Drilling Tips for Rock / Oil / Coal Drilling Bits

 

100% Virgin Raw Materials

Different surface treatment reaches surface accuracy.
Good welding performance

Strict quality control 

 

Tungsten Carbide Mining Material Grades:

 

Grade

Density

T.R.S

Hardness

Performance & application recommended

(g/cm³)

N/mm²

(HRA)

YG4C

15.1

1800

90.0

Mainly used as small buttons for percussion bits to cut soft and medium hard formations.

YG6

14.9

2100

90.0

For coring crowns, electric coal drill bits, coal cutting picks, oil cone bits and scraping knife bits, usd in geological prospecting, coal mining and oil well boring.

YG8

14.7

2400

89.5

For coring crowns, electric coal drill bits, coal cutting picks, cone drill bits and scraping knife bits, used in geological prospecting, coal mining and oil well boring.

YG8C

14.8

2450

88.5

Mostly used as the buttons of small and mediumsized percussion bits and as the inserts of rotary prospecting bits to cut soft and medium hard formations.

YK15

14.6

2450

87.6

Suitable to strips, conical buttons for rotary percussion-resistant,geological prospectioin buttons, cut soft and medium hard formation.

YK20

14.4

2500

86.8

Primarily for the buttons and inserts of rotary percussion bits to cut medium-hard and very hard formations.

YK25

14.4

2550

87.2

Primarily for the buttons and inserts of rotary percussion bits to cut medium-hard and very hard formations.

YG11C

14.4

2700

86.5

Largely for the inserts and buttons of percussion bits and tricone bits   to cut medium-hard, hard and very hard formations.

 

Leave Messages
QUESTION? LET US HELP.
Simple choose a support option from the icons below:
FOLLOW US ON:
Copyright © Hubei Fotma Machinery Co.Ltd   Powered by Fotma